How to Upload a Midi File to the Yamaha Xf8 Youtube

Setting upwardly the XF with Cubase via USB for MIDI recording on a Windows computer.
Motif XF USB-MIDI Quick Setup Guide for Windows

What y'all can do:
USB is MIDI but between the Motif XF and the computer, you can do all things possible with a MIDI multi-port connection:

• Tape and Edit MIDI data to a DAW (Digital Audio Workstation) software, like Cubase
  • The "Score" feature allows you to practise music notation
• Piece of work with the Motif XF Editor Standalone/VST
  • Manage and Edit your sounds

Install "Cubase AI" on your computer.
A gratis copy of Cubase AI (or download Access Code) was provided with the original purchase of a Motif XF. Installing, activating and registering your copy is well worth the attempt.

Download and Install the following software by going to the Motif XF download site.

Official Yamaha Download site

Download and install the latest "Motif XF Extensions version ane.ane.1" (or later)
Download and install the latest "Motif XF Editor Standalone/VST version 1.6.four" (or later)

Download and install the "Yamaha USB-MIDI commuter" version for your item computer type; there are different versions for 32-bit and 64-bit operating systems. Electric current is "Yamaha USB-MIDI driver version 3.ane.3" (or later)

Because the editor uses multiple ports to connect with the Motif XF, you MUST apply either USB (or Firewire) to utilise the editors. Translation: Regular five-pin MIDI cables will not work.

Connect via USB

Connect the Motif XF to your computer via USB.

Fix the Motif XF to MIDI IN/OUT = USB

• Press [UTILITY]

• Press [F5] Command

• Press [SF2] MIDI

• Set MIDI IN/OUT = USB

• Press [STORE] to write this to your Flash ROM

Launch Cubase AI

• Click DEVICES

• Select DEVICE SETUP

• Under the "MIDI" folder highlight "MIDI PORT SETUP"

• You lot should run across your Motif XF(x): Example below uses a Motif XF7

• Select Motif XF(x)-1 every bit the "In 'All Inputs'" (where 'ten' is your Motif XF model 6, 7 or eight)

Additionally, you may marking port three (as shown) if you lot have another MIDI controller connected to the Motif XF's MIDI IN jack.

You do not take to worry about the "State" (Active/Inactive) as this is only a current condition written report. You lot do non want to have Yamaha Motif XF7 Port 2 marked in the IN ALL INPUTS cavalcade as this is reserved for REMOTE CONTROL functions. If yous have another controller keyboard plugged into the MIDI IN jack of the XS, you lot could peradventure activate Port three. The "In 'ALL INPUT'" function is for your keyboard or MIDI controllers simply.

• Under the "Remote Devices" folder highlight "Yamaha Motif XF"

If it does not appear click on the big "+" symbol in the upper left and ADD the "Yamaha Motif XF" device.

• Set it to Port two (YAMAHA MOTIF XF7 Port2) for both MIDI IN and MIDI OUT

  

  If y'all are using an audio interface connect that now under the "VST Audio System". Your audio interface maybe different or you lot may non yet have ane at all… use the driver that is advisable for your interface. If you are only recording MIDI yous do not need an sound interface (in which case yous tin can skip this step).

• Click APPLY

• Click OK

Setup the Motif XF Editor (Standalone)

The version of the EDITOR later 1.six.0 can be run every bit a "standalone" Editor which means without a host DAW, or information technology can be run inside your DAW if it is VST3 uniform.

To launch it as a "standalone" but double click its icon in your APPs expanse or elevate a re-create of the icon into your START field for quick access. Again you would but use this in Standalone mode when you want to EDIT your Motif XF and do not want to launch your DAW, or if your DAW is not able to run VST3 Plug-ins. The SETUP screen for Standalone operation is slightly different from the SETUP screen for VST use (Both are shown beneath)

Double click the Motif XF icon and the Motif XF VST graphic interface opens:

• Click on FILE > SETUP on the Motif XF Editor toolbar

  Hither you lot want to setup the communication between the Motif XF and the Editor.

• Select USB as the Information PORT

• Set up the Item = ON

  Make settings for Port 1 and Port 4. The USB connection requires a two-mode, 2 port advice.

  

Port 1: Motif X7 Port 1 for both MIDI IN and MIDI OUT

Port 4: Motif XF7 Port iv for both MIDI IN and MIDI OUT

To launch the Editor as VSTi (within CUBASE)

Launch Cubase first.

Go to DEVICES > VST INSTRUMENTS > click on a space "no instrument", select EXTERNAL > Motif XF VST You volition exist asked if yous want to create a MIDI Track assigned to this plug-in.

When this is done you can navigate to the FILE > SETUP screen

Next you make a conclusion well-nigh the direction of advice. There are two things to consider:

1. When you open a New Project in Cubase, how practise you desire the Editor to carry?

2. When yous open a previously saved Projection, how exercise you want the Editor to behave?

Typically, when you create a New Project you lot will want the Editor to articulate a new MIX for you. Therefore you will want to take data sent FROM the Editor TO the Motif XF. When you lot are restoring a previously saved Cubase Projection yous will desire the Editor to send your saved data dorsum to the Motif XF. Therefore you will want to accept data sent FROM the Editor TO the Motif XF.

As y'all can encounter I have the Auto Sync Setting prepare to Current = PC > Motif XF

This is so that the Full Retrieve volition transport the Current MIX from the computer to the Motif XF when I open a Cubase Project. Restoring my Mix to my Motif XF. Information technology will practise the same matter when I create a New Project. Cool!

I take the Vocalisation option set to OFF, as I don't often need to reload all the User Voices (but y'all tin set this as your prefer). If set to ON, so the Editor can restore all your USER1, USER2, USER3, USER4 and USER Drum Kit Voices to your Motif XF each time. It is your pick. Since Vocalism data always remains in the memory of your Motif XF hardware, there is really no reason to restore the Voices information at each re synchronization. Existence that it simply happens on the rare occasion, we recommend leaving the VOICE option = Off.

Car Outset is ON

Ready the USER INTERFACE SETTING as you adopt. The Keyboard Velocity part when set to "FREE" will change how loud the note plays past where on the keyboard icon KEY you click. This is pretty cool…

• Click OK

On the main Motif XF Editor screen you desire to make sure that the Editor is ONLINE.

A bright dot appears adjacent to ONLINE when yous are communicating. In the left upper corner you will see the Modes: Vox, Song and PATTERN followed by the "ONLINE" radio button.

Communication is bi-directional and simultaneous so selecting the mode here will change your hardware and vice- versa.

The ONLINE option has 3 status atmospheric condition. It volition read either:

*ONLNE w/dot – This means yous are communicating and all is well
*OFFLINE w/ dot – you are temporarily offline just all is well
OFFLINE – yous have problem. Please cheque your connections

The OFFLINE w/dot indicator is of import because yous will at some point need to make changes on the hardware and not have the software follow you. This can occur when yous are looking for a SONG or Pattern already in the Motif XF – the Editor will attempt to synchronize each time you scroll through a song. Therefore information technology is useful to click this selection when you lot want to temporarily suspension communication. You tin can click ON and OFFLINE every bit necessary.

If you change modes and get to VOICE style or to PERFORMANCE mode on the Motif XF hardware front panel, the Motif XF Editor will go temporarily *OFFLINE west/dot.

On the Toolbar of the Motif XF Editor you will run into the Bulk option. This is what y'all apply to asking a bulk to (Transmit) or from (Receive) the Motif XF. You can select the Electric current MIX, and whatever of the USER Banks or ALL of the USER Banks. This is meaning because you volition want to keep a backup of the electric current LIBRARY loaded into your hardware at the fourth dimension of this Project.

Do not modify your preference in the FILE > SETUP > AUTO SYNC SETTING – when yous need to send or receive data from the Motif XF utilize this BULK option. This is what it is designed for...

Click BULK > Data SYNC

Highlight "Receive"

Check the attributes you lot wish to capture Click OK to execute.

This data volition be bundled and Saved.

If you are running in "Stand alone" mode, save a Motif XF Editor file (.X3A)

If you are running as "VST" the XF data volition automatically exist saved and bundled with the host DAW'southward Projection file. In Cubase this will be a (.CPR) type file.

• In Cubase AI click on the FILE selection
• Select "NEW PROJECT"
• Select "EMPTY"

You tin can use any of the pre-made Templates or you tin create your own. Ultimately, you will want to create your own once you develop a preference of how you similar to work. Cubase will ask you to select a directory for your Project. You tin can "create" a folder or simply target ane yous have made previously.

Next you will create a track layout. This will exist your own personal preference. For our example we will create a Track setup with 8 MIDI Tracks (you can fix every bit many as you require). Remember you can easily add tracks or remove tracks in Cubase past simply right clicking and using the ADD TRACK or REMOVE TRACK selection.

• Right click and select "Add together TRACK" > MIDI
• Brand the Track Count 8
• Click OK

Each of the viii tracks volition be set to "All MIDI Input" and equally we know this is the Motif XF port 1. Each of the 8 tracks will exist routed out to the Yamaha Motif XF, and each will be on a successively higher MIDI aqueduct. Verify this.

Next click on FILE > SAVE As TEMPLATE...
Proper noun the template something descriptive.

I named mine "Motif XF USB 8 MIDI". Here's why... It reminds me that this template is for when I'm working with the Motif XF (in my studio I demand this information). I include USB in the description because this template volition configure my connections via USB; I take a divide template for when I am working with the firewire connectedness. The "8 MIDI" reminds me how many tracks are in this template and what type of tracks.

Every bit you get to know your working habits you can refine you Template. You can even pre-select VOICES for the PARTS, if y'all want. If you lot are using a particular Audio Interface, you lot can select the output assignments for your XF PARTS. For example, if you are not using audio, or you are continued to an external audio interface via two 1/iv" cables, yous will want to prepare the OUTPUT SELECT parameter for each Office = 50&R (the individual outputs are for those using the optional FireWire connection.

Attempt out your TEMPLATE

Click WINDOW and select "Close All"

• Go to FILE > New Projection...
• Click on your new Template
• Select a directory for this project
• Click OK to launch your Template

It will remember your USB connections, your REMOTE Settings, your audio interface settings; think the hardware configuration, recollect the MIDI connections, and recall the Current Mix and Voices if you included them. It will then enquire you if desire to restore this to your hardware. Why this extra step? Because at some point you may actually showtime a project in the Motif XF – say you take a quick idea and want to go it down fast. Later you say I'd like to continue my piece of work in Cubase rather than having the Editor automatically accident away your hardware settings, you get this screen that lets you verify that you want to become FROM or TO the Hardware. Very useful... if you lot have done a setup in the Motif XF and you lot want to take the Editor capture information technology: simply select 'FROM HARDWARE' option. If you want to ship your basic kickoff upwardly template select the 'TO HARDWARE' option.

You can customize these instructions to your own preferences. Mayhap you always start with a detail Drum Kit, Bass audio and Keyboard sound; yous can brand your TEMPLATE that includes the Motif XF Editor with the Voices you similar already programmed and assigned to the appropriate outputs.

Advantage and Conclusion
The Studio Connexion: Call up protocol allows you lot to store and recollect your external hardware settings in your Cubase Projection File. The Editor will memorize every setting on the external hardware y'all were using on a Projection, it will shop non just the Voice list but also the unabridged mix. That is, every parameter you use, and every Voice in your Motif XF, per project. This is total retrieve.

greenwoodfloo1970.blogspot.com

Source: https://yamahasynth.com/learn/2010s/motif-xf-usb-midi-setup-windows-guide

Share this post